Overhead crane in a large industrial hall

CRANES AND MATERIAL HANDLING

Reeling cables on workshop and yard cranes

The application

Overhead cranes and hoists in workshops and outdoor yards reel their power feed in and out hundreds of times a week. The cable hangs, twists and drags under its own weight, in rain, dust and winter cold.

The challenge

Ordinary round cables corkscrew on the reel: once the lay of the cable fights the winding, the jacket wears in one spot and the cores fatigue. Festoon runs along the bridge add a second problem — space is tight and the cable must fold flat, not kink.

The Hyverton build

The reel feed uses our Reeling Cable, built with an anti-torsion braid and an abrasion-resistant outer jacket made for continuous winding under tension. The bridge festoon runs on High-Flex Power Cable, whose fine-stranded round construction folds cleanly in the festoon loop and separates the cores so they share the bending load. Both are supplied cut to the crane’s travel length, with the reel end prepared to the builder’s connection drawing.

Products used: Reeling Cable, High-Flex Power Cable

Anti-torsion braid for reel duty · Abrasion-resistant jacket · Fine-stranded round construction · Cut to travel length

Frequently asked questions

Why do ordinary round cables fail on a crane reel?
They corkscrew on the reel: once the lay of the cable fights the winding, the jacket wears in one spot and the cores fatigue — the failure this application is built around.
What makes the Reeling Cable hold up?
It is built with an anti-torsion braid and an abrasion-resistant outer jacket, made for continuous winding under tension — hundreds of reel cycles a week, outdoors in rain, dust and winter cold.
What runs along the bridge festoon?
High-Flex Power Cable. Its fine-stranded round construction folds cleanly in the festoon loop instead of kinking, and the cores are separated so they share the bending load in the tight space along the bridge.
How are the cables supplied?
Cut to the crane’s travel length, with the reel end prepared to the builder’s connection drawing. Custom runs start from 300 m.