High-speed flow-pack lines in Danish food packaging

FOOD PACKAGING · DENMARK
High-speed flow-pack lines in Danish food packaging
The application
A builder of horizontal flow-pack and tray-sealing machines for the Danish food industry runs its pusher and sealing axes around the clock. The drag chains on these machines are short, tight and fast, and the cables inside them work in air carrying oil and fat mist from the sealing process.
The challenge
At well over a hundred packs a minute, bending cycles accumulate faster than maintenance schedules expect. Standard PVC chain cables stiffened in the cold parts of the hall, then cracked at the bend. On a packaging line, an unplanned stop costs more per hour than the cable set it stops for.
The Hyverton build
The fast axes are wired with EKM71900, our PUR high-speed drag chain cable — a special polyurethane jacket over a fine-strand Class 6 conductor, rated for more than 20 million bending cycles and resistant to the oils that attack PVC. Slower auxiliary axes use EKM71100 high-speed flex, and the sealing-axis drives run on our shielded Servo Motor Cable. Everything is cut to the machine’s axis lengths and delivered as labelled per-axis kits, so the builder’s fitters mount a set instead of cutting from a drum.
Products used: EKM71900 PUR High-Speed, EKM71100 High-Speed Flex, Servo Motor Cable
Jacket: PUR, oil-resistant · Bending cycles: over 20 million · Supply: per-axis kits, cut to length · Custom runs from 300 m
Frequently asked questions
- Why do the fast axes on these machines use PUR instead of PVC?
- The air around the sealing process carries oil and fat mist, which attacks PVC — and the standard PVC cables also stiffened in the cold parts of the hall before cracking at the bend. EKM71900’s special polyurethane jacket resists those oils, and the cable is rated for more than 20 million bending cycles over a fine-strand Class 6 conductor.
- Which cable belongs on which axis?
- The fast axes run on EKM71900. Slower auxiliary axes use EKM71100 high-speed flex, and the sealing-axis drives run on the shielded Servo Motor Cable.
- Do we cut the cables to length ourselves?
- No. Everything is cut to the machine’s axis lengths and delivered as labelled per-axis kits, so your fitters mount a set instead of cutting from a drum.
- What is the minimum run for a custom production?
- Custom runs start from 300 m.