Technical guide · Drag chain cables · Selection

“Just take PUR, it’s better” is the most expensive sentence in cable buying. PUR jackets genuinely outlast PVC in harsh duty — and are a waste of money in a clean indoor machine. The honest comparison is about environment and speed class, not about which material is “premium”.

Same platform, different jacket

PVC and PUR drag chain cables share the same electrical platform: fine-stranded copper, short lay lengths, the same core constructions. The jacket is what changes — and with it abrasion behaviour, chemical resistance, temperature range and the speed classes the cable is built for. In our range the volume sellers (EKM61100 class, medium speed, around 7 million bending cycles) are PVC; the high-flex flagship EKM71900 is PUR, rated beyond 20 million cycles.

Side by side

PropertyFlexible PVC jacketPUR jacket
Abrasion resistanceGoodExcellent — the reason PUR survives long-travel and gliding chains
Oil & coolantModerate (oil-resistant compounds available)Strong — the default where cutting fluids splash
Temperature, flexible service (typical)about −15…+70 °Cabout −40…+80 °C
Outdoor / UVIndoor use; UV-stabilised types on requestSuitable; also hydrolysis-resistant grades
Flex life class in our rangeLow- and medium-speed classes (to ≈7M cycles)High-speed class (>20M cycles)
SurfaceMattGlossy or matt finishes
Price levelBaselineA clear step up — commonly 1.5–2× the PVC equivalent

Temperature figures are typical ranges for flexible compounds of each family; the datasheet of the specific type governs.

Choose PVC when…

  • The machine runs indoors in a normal factory environment — machine tools, packaging, handling, assembly.
  • Speed and travel are moderate (the medium-speed class covers most European machinery).
  • Volume matters: on a multi-axis machine with ten chains, the PUR premium buys nothing the application can use.

Choose PUR when…

  • Cutting oil, coolant or hydraulic fluid reaches the chain — PVC jackets swell and crack over time.
  • The application is genuinely fast or long-travel: high-speed gantries, storage systems, long gliding runs where jacket abrasion is the wear mechanism.
  • The chain works outdoors, in cold stores (PVC stiffens as temperature falls), or in wet areas.
  • Downtime costs dwarf cable costs — the premium is insurance on the wear part of the system.

The trap: putting PUR cable into a badly installed chain. PUR survives abrasion better, but corkscrewing, tension and a too-tight radius kill it almost as fast as PVC. Fix the installation first; then step up the material if the duty still demands it.

Frequently asked questions

Is PUR always the longer-life choice?
Only where the wear mechanism is abrasion, oil or temperature. In a clean indoor chain at medium speed, a PVC cable reaches its rated cycles at roughly half the purchase price — the PUR cable’s extra capability is never used.
Can I mix PVC and PUR cables in one chain?
Yes. Jacket materials do not interact. Keep the usual separation rules, and remember the chain radius is set by the largest cable, whichever jacket it wears.
Why does PUR cost more?
The raw material and its processing are more expensive, and PUR high-flex types are built to tighter constructions for the high-speed classes. Expect a clear step up from the PVC equivalent — which is exactly why it should be specified where it earns its keep, not everywhere.
My PVC jackets crack near coolant. Is that a quality defect?
Usually not — it is the known PVC weakness against oils and cooling lubricants. The correct fix is a material change to PUR (or an oil-resistant PVC compound for mild exposure), not a warranty claim on the next PVC cable.

Tell us the environment, we will tell you the jacket

Coolant, temperature, speed and travel decide this — not habit. Send the machine details and we will quote the construction that fits, in PVC or PUR.

EKM71900 — PUR high-flex Request a quote